How to Export Server Packages from Euro Truck Simulator 2

Note:

Exporting server packages is required for any Euro Truck Simulator 2 server. These files tell your server which mods, map data, and gameplay settings your game client is using. You must export these packages locally and then upload them to your server.

Important!

Your Developer Console must be enabled.
(Guide: How to Enable the Developer Console in ETS2)
Your game must be completely closed before uploading the files later.

1. Launch ETS2 and Enter the Game World

• Open Euro Truck Simulator 2.
• Select your profile.
• Select Drive to enter the main game world.

You must be in the driving environment for the console command to work.

---

2. Open the Developer Console

Press the tilde key (~).
If the console does not appear, your console is not enabled and you must enable it first.

---

3. Run the Export Command

Inside the developer console, type:

export_server_packages

Press Enter.

If successful, the console will confirm that the server packages were generated.

---

4. Locate Your Server Packages

Close the game completely, then open your ETS2 data folder:

Windows

Documents\Euro Truck Simulator 2\

Inside the folder, you will now see these two files:

• server_packages.dat
• server_packages.sii

These two files are required for any dedicated ETS2 server.

---

5. Upload the Files to Your Server (Cybrancee)

1. Open your Cybrancee control panel.
2. Stop your ETS2 server.
3. Select the ‘Files’ Tab

1. Navigate to the ETS2 data directory (.local/share/Euro Truck Simulator 2/ on the server).
2. Upload both files:
   • server_packages.dat
   • server_packages.sii
3. Start the server again.

Your server will now use the new configuration.

Euro Truck Simulator 2 Server Hosting

Starts at $3.99

Was this article helpful?

0 0

Please Share Your Feedback

How Can We Improve This Article?

Submit