How to Connect Smart Alarms in the Rust+ App

Note:

Before you can use Rust+ to manage Smart Alarm, make sure the Rust+ app is already paired with your server. You can follow our guide How to Pair the Rust+ Mobile App With Your Server.

1. What Do You Need

• Smart Alarm
• Smart Switch (optional, if you want remote toggling ON/OFF)
• Wire Tool
• Power Source

---

2. Pair Your Rust+ App

Ensure your Rust+ app is linked with your server. You will need this connection to pair your Smart Alarm.

---

3. Install Your Smart Alarm

• Deploy the Smart Alarm somewhere accessible in your base.

---

4. Set Your Alarm Message

• Connect to a power source.
• Optionally, wire it to a Smart Switch if you want remote toggling.
• Hold E with the Wire Tool on the Smart Switch and select the ‘Edit Message – Edit the message sent by the Smart Alarm‘.

---

5. Pair Your Smart Alarm

• Hold E with the Wire Tool on the Smart Switch and select the ‘Pair this device with Rust+‘.
• You’ll receive a push notification on your mobile device. Accept it to make the Smart Switch appear in the ‘Devices’ tab of Rust+.

---

6. Go to the ‘Devices’ Tab

Open the Rust+ app on your mobile device and tap the alarm icon to access the Devices section.

---

7. Manage Your Devices

All paired Smart Alarms will now appear in the Devices tab.

Rust Server Hosting

Starts at $11.99

Was this article helpful?

0 0

Please Share Your Feedback

How Can We Improve This Article?

Submit